5pcsATTEN AT-20-3C horseshoe soldering tip 936 thermostatic station Universal oblique mouth | Инструменты

---

 

Product name:5PCS ATTEN AT-20-3C horseshoe soldering tip 936 thermostatic soldering station Universal oblique mouth soldering tip 936

 

Product description:

Antai letter welding head adopts the imported oxygen-free copper as raw materials, processing size is precise, fast heat conduction

Used on electric degrees nearly sodium m technology first, with super anti-corrosion, anti-oxidation, welding life more than 20000 points.

 

 

The maintenance of the welding head: 1. Prior to welding work Must first put sponge wet clean water, then drain excess water, such ability can make the welding head to get the best cleaning effect. If use a wet sponge, can make the welding head is damaged and cause no tin. 2. When the welding work The following welding can solder welding head in order of their protection and reduce oxidation rate. 3. After the welding work The thermostat at about 250  first, and then clean the welding head, plus a new tin layer protection. (if using the temperature controlling welding machine, turn off the film first, let the welding head temperature slightly lower after the tin.)  

 

4. The matters needing attention A. try to use low temperature welding High temperature can make the welding head accelerated oxidation, reduce the welding head life. If the welding head temperature over 470 , its oxidation rate is twice as large as 380 . B. don't pressure is too large When soldering, do not pressure is too large, otherwise it will deform the welding head is damaged, as long as the welding head can be fully contact solder joints, heat can pass, in addition to choose the appropriate welding head can also help the heat transfer. C. often keep the tin soldering iron head It can reduce the oxidation of welding head opportunity, make the welding head is more durable. After use, should be slightly lower after add new welding head temperature soldering, make the tin plating layer has better anti-oxidation effect  

 

D. keep soldering iron clean, clear in time the oxide If the soldering iron head with black oxide, tin welding head can not meeting, at this time must be cleaned up immediately, when cleaning the welding head first thermostat at about 250 , and then clean with a clean sponge iron head, and then on the tin, repetitive movements, the oxides directly to clean up. E. choose active low flux Active high or caustic flux when heated accelerated corrosion in welding head, so should choose low corrosive flux. Note: do not use the sand paper or hard clean welding head. F. the soldering iron on the soldering iron stand received should be carefully put soldering iron welding steel shelves at the right moment, in order to avoid collision and damage of the welding head.

 

AT-20-2C-type tip specifications and dimensions((iron outer diameter of 3mm)

ATTEN soldering tip has the following characteristics:

1. The oxygen-free copper material imported raw materials, shape processing size precision, fast heat conduction;

2. Move the tin and smooth, stable performance, smooth solder joints after welding, uniform;

3. Appearance of special machinery and production process, size precision;

4. Take the tin and smooth, life more than 50,000 joints, Aetna quality, trustworthy!

5. The use of the first electric near nanometer technology, with superior anti-corrosion, oxidation resistance, welding life is more than 50,000 points.

 

Figure:

  5PCS*AT-20-3C