Camera mobile power bank supply usb cable EH-5 EH-5A+EP-5F DC Coupler EN-EL24 dummy battery for Nikon 1 J5 1J5 |

Camera mobile power bank supply usb cable EH-5 EH-5A+EP-5F DC Coupler EN-EL24 dummy battery for Nikon 1 J5 1J5 |

DC drive cable It works wonderfully: For Nikon 1 J5 For Nikon 1J5 Package Includes: 1 x  USB drive cable EH5 1 x  DC Coupler EP-5F 1 x  Manual   Especially recommended with this use, convenient indoor access home electricity, long time use. Click to open the corresponding product page: 15w usb power adapter .     If you use "DC drive cable" and Power Bank:     We notice a buyer feedback that, use our prodcuts can start his camera, but when shooting, the camera shut down. we'd like to explain here, we provide the the DC coupler and the USB cable adpater only. For this customer's case, proves our products can successfully connect the power, and the cable adapter successfully improves the voltage. But when shooting, the camera shut down, this the power source's problem.This situation,Please use a power source at least DC 5V 2.4A, DC 3A is better. To solve this problem, you just need to change a power source.      Choose a quality power bank, there are too many power banks on the market. There are some mobile power parameters that mark the fake output, they do not allow to draw higher current, when you shoot, it's bond to draws higher power than you start the camera, then the power bank stop supplying the power, then the camera shut down. We recommend: such as the Xiaomi 20000mAh version (not Xiaomi 2C ), which allows maximum DC output DC 5.1V 3.6A, or xiaomi 10000mah Pro, Zmi 10 20000mah, CHOETECH 10400mAh (QC3.0) and other well-known and reliable brand. Recommended USB power port 5V-5.5V current 2.4A and above, 3A is better.      Tips:  General digital battery printed above parameters 7.2V / 7.4V labeled battery, it is the camera's minimum operating voltage, these batteries need to use 8.4V charger, full of power, charger 8.4V said no-load voltage, operating voltage and no-load voltage are two different concepts. External power used in the camera, You need to have enough power to supply, the camera is a load,the operating voltage is far lower than the no-load voltage.Therefore, the Camera adapter's no-load voltage is usually between 8V-9V (Note: the multimeter test is no-load voltage).   (DC drive cable,customized production,strict inspection,High quality chip,efficient conversion rate.)    Low input costs, Replace battery grip , suitable for indoor and outdoor.   (Please Read Before ordering) [Big order] If you order more, contact us.we will give you a reasonable discount. Welcome to visit our shop for more accessories, if you need wholesale lots,please feel free to contact us, We are right here waiting for you.