25*35mm White Detector IR Switch Controller PIR Infrared Motion Sensor For Porch Home Lights LED Lamp | Обустройство дома

25*35mm White Detector IR Switch Controller PIR Infrared Motion Sensor For Porch Home Lights LED Lamp | Обустройство дома

Item Describe:

1. Product Name:PIR Infrared Motion Sensor
2. Power supply: AC 110~250v 50~60Hz
3. Load power: 5W~200W
4. Sensor distance: 5~8m
5. Dimension: Approx 25*35mm

Application:
DIY LED Lamp,Incandescent lamp, energy-saving lamps, LED lamp, fluorescent lamp


Installation Notes:

When installed, the sensor on the sensor should move towards the direction of the human body. Connect the 220V power supply, (the power cord is not zero fire line). Wrapped with electricity cloth, monk power switch can be used.

Detection method:
1. When the power is turned on, the light is off and off for the state, people need to leave the sensor area for more than 1 minute, waiting for the first power recovery process. At this time the induction lamp should be off. Dark detection, people into the induction area lights, leave the sensor area and wait for more than the delay time (usually 30 ~ 45 seconds) induction off.
2. During the day to see the test, you can use black objects will cover all the induction lights, then light. The person leaves the sensing area and the waiting time exceeds the delay time, and the induction goes off.
3. If the sensor light without light control function, regardless of daytime darker as long as someone walked through the sensor area, the light on the light, leave the lights off. Once the sensor lights are shunted by the divider, as long as the delay time and in the sensor area to continue to move around, then the second time to move the lanterns, continue to delay later, so the surface is watching, the lights are always lit.
4. If the human body in the stone wall between the static and beyond the delay time, the sensor will automatically turn off (because the sensor can only be sensed to move the body of the signal, for the static body does not sense).

Note:

1. Do not operate with electricity when installing
2. Inductive switch detection range shall not have a screen, furniture, large bonsai or other isolates

3. Install the body sensor switch should be away from the heating, air conditioning, refrigerators, stoves and other air temperature changes sensitive place

4. Switch not directly against the window, will cause the window outside the hot air disturbance and personnel walking caused by false positives

5. The top of the human body sensor switch from the ground should not be too high, preferably between 2.4-3.1 meters. Wall mounted body sensor switch can be installed in the original switch position, direct replacement.

Package Included:

1 x Automatic Infrared PIR Motion Sensor Switch