1210AN 4210AN 30A 40A Solar Charge Controller Tracer-AN1 Tracer 2V 24V PV Input LCD Monitor Charger | Обустройство дома

1210AN 4210AN 30A 40A Solar Charge Controller Tracer-AN1 Tracer 2V 24V PV Input LCD Monitor Charger | Обустройство дома

JP164601-2

1210AN 4210AN 30A 40A Solar Charge Controller Tracer-AN1 Tracer 2V 24V PV Input LCD Monitor Solar Charger

Battery : Sealed, Gel, Flooded.

Features：

1, communication port protection

Tracer-AN adds a dedicated 5V power supply protection chip to the communication port, which has short-circuit protection and current-limit protection.

2, LCD backlight function

Tracer-AN adds LCD backlighting, and the backlight time defaults to 60S.

3, PV charging current limit power function

Tracer-AN has a current-limited power function, so there is no excess phenomenon at high voltage or low voltage, so customers can safely over-integrate photovoltaic modules without damaging the controller.

4, over temperature derating function

Tracer-AN adds high temperature drop power charging. When the internal temperature is 81 °C, the charging and power reduction mode is turned on. For every 1 °C increase, the charging power is reduced by 5%, 10%, 20%, and 40%, respectively. When the temperature reaches 85 °C or higher, the charging is stopped immediately. When the internal temperature is not more than 75 ° C, the rated charging power is restored.

5, baud rate modification function

Tracer-AN increases the baud rate custom modification function. It can be used with the IT/ET to modify the baud rate.

6, algorithm optimization

Tracer-AN improves the dynamic response speed. When used in a RV or cloudy weather, when the panel is in a variable condition, the MPP tracking efficiency is higher.

Specifications:

• Model:Tracer4210AN
• Rated Nominal Voltage: 12 / 24V DC Auto Work
• Nominal charging current: 40A
• Discharge current: 40A
• Max. Battery voltage: 32V
• Max. Solar input voltage: 100V
• Battery voltage: 9V ~ 32V
• Max. PV input power: 520W (12V) 1040W (24V)
• Equalizing voltage: closed: 14.6V, wet battery: 14.8V programmable via PC
• Starting charge voltage: Gel: 14.2V, closed: 14.6V, wet battery: 14.8V programmable via PC
• Trickle charging voltage: gel / closed / wet battery: 13.8V, programmable via PC
• Undervoltage at reconnection: gel / closed / wet battery 12.6V, programmable via P
• Undervoltage at connection termination: gel / closed / wet battery: 11.1V, programmable via PC
• Current consumption: ≤20mA / 12V; ≤16mA / 24V
• Operating temperature: -25 ° C - + 45 ° C
• Protection: IP30
• Dimensions: 252x180x63mm
• Weight: 1.9kg

Package Includes:

• 1 X MPPT Solar Controller
• 1 X special packaging
• 1 X manual